HELIX NEXT V TWO

Kuvaus

Technical data

Power RMS ≤ 1% THD+N
– @ 4 Ohms 2 x 200 Watts
– @ 2 Ohms 2 x 400 Watts
– @ 1 Ohm –
– bridged @ 4 Ohms 1 x 800 Watts
– bridged @ 2 Ohms –
Max. output power per channel* Up to 500 Watts RMS @ 2 Ohms
Up to 1000 Watts RMS @4 Ohms bridged
Amplifier technology Class D
Inputs 2 x RCA / Cinch
2 x V-AMP Link
1 x Remote In
Input sensitivity RCA / Cinch: 0.5 – 8 Volts
V-AMP Link: 1.5 – 21 Volts
Input impedance RCA / Cinch: 3 kOhms
V-AMP Link: 13 Ohms
Outputs 2 x Speaker output
Output voltage RCA / Cinch –
Signal converter for digital input –
Frequency response 10 Hz – 22,000 Hz
Bass boost –
Highpass –
Lowpass –
Bandpass –
Subsonic –
Phase –
Slope high- / lowpass –
Slope subsonic –
Slope subsonic / lowpass –
Signal-to-noise ratio (A-weighted) 109 dB
Distortion (THD @ 1 kHz, 1 W into 4 Ohms) 0.003%
Distortion (THD+N @ 1 kHz, 1 W into 4 Ohms) 0.004 %
Distortion (THD @ 100 Hz, 1 W into 4 Ohms) –
Distortion (THD+N @ 100 Hz, 1 W into 4 Ohms) –
Damping factor 350
Operating voltage 10.5 – 18 Volts (max. 5 sec. down to 6 Volts)
Idle current 1,400 mA
Fuse 3 x 30 A LP-Mini-fuse (APS)
Power rating DC 12 V ⎓ 86 A max.
Operating temperature range -40 °C to +70 °C
Additional features Auto-Gain-Ranging, Mono / Stereo Mode, Start-Stop capability, V-AMP Link, regulated power supply
Dimensions (H x W x D) 44 x 220 x 180 mm /
1.73 x 8.66 x 7.09”
* In typical applications as subwoofer amplifier

Scope of delivery
1 x Amplifier HELIX NEXT V TWO
2 x Allen key
3 x Fuse
1 x Mounting material
1 x Instruction manual