MATCH UP 4DSP

Kuvaus

Output power RMS
– @ 4 Ohms Channels A – B: 2 x 60 Watts (min. 3 Ohms)
– @ 2 Ohms –
– @ 1 Ohm –
– bridged @ 4 Ohms –
– bridged @ 2 Ohms –
– Subwoofer output @ 4 Ohms Kanal C – D: 2 x 85 Watts
– Subwoofer output @ 2 Ohms Kanal C – D: 2 x 140 Watts
Amplifier technology Class GD
Inputs 4 x Highlevel speaker input
1 x Optical SPDIF (12 – 96 kHz)
Input sensitivity 2.8 – 11 Volts
Input impedance RCA / Cinch –
Input impedance highlevel 9 – 33 Ohms with ADEP.3
Outputs 4 x Speaker output
1 x RCA / Cinch
1 x Remote Out
Output voltage RCA / Cinch 3 Volts RMS
Frequency response 15 Hz – 22,000 Hz
DSP resolution 64 Bit
DSP power 295 MHz (1.2 billion MAC operations/second)
Sampling rate 48 kHz
DSP type Audio signal processor
Signal converters A/D: BurrBrown
D/A: BurrBrown
Signal-to-noise ratio digital input 102 dB (A-weighted)
Signal-to-noise ratio analog input 101 dB (A-weighted)
Distortion (THD @ 1 kHz, 1 W into 4 Ohms) 0.03 %
Distortion (THD+N @ 1 kHz, 1 W into 4 Ohms) 0.03 %
Damping factor 50
Operating voltage 10.5 – 18 Volts (max. 5 sec. down to 6 Volts)
Power rating DC 12 V ⎓ 35 A max.
Idle current 260 mA
Max. remote output current 500 mA
Operating temperature range -40° C to +70° C
Fuse 1 x 30 A LP-Mini-fuse (APS)
Additional features Class GD technology with dynamically controlled
power supply, 32 Bit CoProcessor, ADEP.3 circuit, Start-Stop capability, Smart Control Port, USB-C, Auto Remote switch, Line Out
Dimensions (H x W x D) 46 x 130 x 110 mm /
1.81 x 5.12 x 4.33″

Scope of delivery
1 x MATCH UPGRADE amplifier UP 4DSP
2 x Connection cable
1 x Mounting plates & material
1 x USB cable
1 x Instruction manual