Match UP 10DSP – 24V Edition

Kuvaus

Compatibility:
Only for operation on 24 Volts vehicle electrical systems!

Technical data:

UP 10DSP – 24V Edition
Output power RMS
– @ 4 Ohms Channels A – H: 8 x 65 Watts
– @ 2 Ohms –
– @ 1 Ohm –
– bridged @ 4 Ohms –
– bridged @ 2 Ohms –
– Subwoofer output @ 4 Ohms Channels I – J: 2 x 90 Watts
– Subwoofer output @ 2 Ohms Channels I – J: 2 x 160 Watts
Amplifier technology Class GD
Inputs 8 x Highlevel speaker input
1 x Optical SPDIF (12 – 96 kHz)
1 x Remote In
Input sensitivity Channels A – F: 4 – 16 Volts
Channels G – H: 4 – 16 or 8 – 32 Volts
Input impedance RCA / Cinch –
Input impedance highlevel 9 – 33 Ohms with ADEP.3
Outputs 10 x Speaker output
1 x RCA / Cinch
1 x Remote Out
Output voltage RCA / Cinch 3 Volts
Frequency response 10 Hz – 22,000 Hz
DSP resolution 64 Bit
DSP power 295 MHz (1.2 billion MAC operations/second)
Sampling rate 48 kHz
DSP type Audio signal processor
Signal converters A/D: BurrBrown
D/A: BurrBrown
Signal-to-noise ratio digital input 105 dB (A-weighted)
Signal-to-noise ratio analog input 103 dB (A-weighted)
Distortion (THD) 0.03 %
Damping factor 100
Operating voltage 18 – 36 Volts (max. 5 sec. down to 12 Volts)
Power rating DC 24 V ⎓ 32 A max.
Idle current 210 mA
Max. remote output current 500 mA
Operating temperature range -40° C to +70° C
Fuse 2 x 25 A LP-Mini-fuse (APS)
Additional features Class GD technology with dynamically controlled
power supply, 32 Bit CoProcessor, ADEP.3 circuit, Start-Stop capability, Smart Control Port, USB, MEC slot, Auto Remote switch, galvanically isolated Line Out
Dimensions (H x W x D) 46 x 145 x 163 mm /
1.81 x 5.71 x 6.42″

Scope of delivery:

1 x MATCH UPGRADE amplifier UP 10DSP – 24V Edition
2 x Connection cable
1 x Mounting plates & material
1 x USB cable
1 x Instruction manual